Produced at less than $1 per watt, the panels will dramatically reduce the cost of generating solar electricity and could power homes and businesses around the globe with clean energy for roughly the same cost as traditionally generated electricity.
Sampath has developed a continuous, automated manufacturing process for solar panels using glass coating with a cadmium telluride thin film instead of the standard high-cost crystalline silicon. Because the process produces high efficiency devices (ranging from 11% to 13%) at a very high rate and yield, it can be done much more cheaply than with existing technologies. The cost to the consumer could be as low as $2 per watt, about half the current cost of solar panels. In addition, this solar technology need not be tied to a grid, so it can be affordably installed and operated in nearly any location.
The process is a low waste process with less than 2% of the materials used in production needing to be recycled. It also makes better use of raw materials since the process converts solar energy into electricity more efficiently. Cadmium telluride solar panels require 100 times less semiconductor material than high-cost crystalline silicon panels.
Sunday, September 23, 2007
High powered solar cells to be mass produced cheaply
This will be big.
No comments:
Post a Comment