Mini nuclear reactors

Hopefully we will get a lot of these made. [Link]

Interest in minireactors has grown over the past few years, according to Felix Killar at the Nuclear Energy Institute. “They're simple and robust, with safety features to allow a country without nuclear expertise to gradually put in small plants, and get people trained and familiar with them before moving into more complex plants.” But small-scale plants could prove useful in the United States, too, particularly in areas where residents must now rely on diesel generators for electricity. Toshiba is reportedly working on a small-scale design for Galena, Alaska. But NuScale Power, the startup spun from Oregon State, is the first American company to submit plans to the NRC, which regulates all domestic nuclear power plants.

The plant's design is similar to that of a Generation III+ “light water” reactor, but the size is unusual. “The whole thing is 65 ft. long,” explains Jose Reyes, head of the nuclear engineering department at Oregon State and a co-founder of NuScale Power. The reactor unit of NuScale's containment unit is 14 ft., compared to a Westinghouse AP1000, a standard current design, which is about 120 ft. in diameter. It has to be built and serviced on-site, but NuScale's units could be manufactured at the factory, then shipped on a rail car or heavy truck to any location and returned for refueling.

As in modern reactors, the containment shell acts as a heat exchanger, Reyes explains. The water closest to the core is vented into the outer shell as steam, where it condenses and drips into the cooling pool, which is recirculated to cool the core. The whole unit sits below grade, without telltale cooling towers. The reactor doesn't use pumps to circulate the water if the unit overheats, which means it needs no external power to cool down. That's a “passive safety” feature that protects the unit from electrical sabotage.

The new unit can be manufactured cheaply, with standard turbines from General Electric, for example, rather than custom-made parts. Because the steel reactor vessel is only 9 ft. in diameter, it can be made entirely in the U.S., rather than relying on Japan Steel Works, the only manufacturer who can cast today's one-piece, 25-ft.-plus reactor vessels.

Each 45-megawatt electrical unit would generate enough power for about 45,000 homes. By comparison, plants operated today generate 1000 to 1700 megawatts, according to NRC spokesman Scott Burnell. “You can't take an AP1000, a large base-load reactor, and put it down where there's no grid to support it. A smaller design could be useful in a remote setting.”

The more of these and others built, the fewer oil burning plants we'll need.